Promise Technology VTrack M-Class M500p Instrukcja Obsługi Pobierz pdf (Strona 16)

VTrak M-Class Quick Start Guide

2. To verify the settings, type net and press Enter.

administrator@cli> net

===========================================

CId Port Type IP Mask Gateway Link

===========================================

1 1 Mgmt 192.168.10.87 255.255.255.0 192.168.10.3 Up

1 1 iSCSI 0.0.0.0 0.0.0.0 0.0.0.0 Down

1 2 iSCSI 0.0.0.0 0.0.0.0 0.0.0.0 Down

3. Type the following string to set the iSCSI Port IP address and other settings,

then press Enter.

administrator@cli> net -a mod -t iSCSI -p 1 -s

"primaryip=192.168.10.88, primaryipmask=255.255.255.0,

gateway=192.168.10.3"

If you prefer to let your DHCP server assign the IP address, type the

following string, then press Enter.

administrator@cli> net -a mod -t iSCSI -p 1 -s "dhcp=enable"

4. To verify the settings, type net and press Enter.

administrator@cli> net

===========================================

CId Port Type IP Mask Gateway Link

===========================================

1 1 Mgmt 192.168.10.87 255.255.255.0 192.168.10.3 Up

1 1 iSCSI 192.168.10.88 255.255.255.0 192.168.10.3 Up

1 2 iSCSI 0.0.0.0 0.0.0.0 0.0.0.0 Down

5. Repeat steps 3 and 4 to set the other iSCSI port. Use -p 2 in place of -p 1.

This completes the Management and iSCSI port setup. Go to “Step 8: Install

iSCSI Initiator on the Host PC” on page 24.

To see the full set of CLI commands, at the admin@cli> prompt, type help and

press Enter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Brak uwag

Promise Technology VTrack M-Class M500p Instrukcja Obsługi Strona 16