
-Click on the "Update Driver" tab and then click "Next".
-Select "Display a list of the known drivers for this device" and then click
"Next".
-Click on "Have Disk" and then insert the System Boot Disk with the
FastTrak/FastTrak66 drivers.
-Click on "OK" and then select "Promise Technology Inc, FastTrak (tm) IDE
Controller" or "Promise Technology Inc, FastTrak66 (tm) IDE Controller"
and then click on "Next".
-Click on "Next" at the "Start Device Driver Installation" dialog box.
-Click "YES" at the "Digital Signature" dialog box.
-Click "Finish" and then click on "Close" on the "Promise Technology Inc,
FastTrak66" properties box.
-Click on "YES" to restart the computer when prompted. Leave the System Boot
Disk with the FastTrak/FastTrak66 Drivers and BIOS in the A: drive.
STEP TWO
-Once you have restarted the computer with the System Boot Disk and have
reached the A:\ Prompt, type "ptiflash" (with no quotations) and then press
the "Enter" key.
-Select option 1 on the menu by pressing the "1" key on your keyboard.
-Type "a:\bios.old" (without quotations) and then press the "Enter" key.
-The "Backup Success" message will appear, press the "Enter" key.
-Select option 2 on the menu by pressing the "2" key on your keyboard.
-Type, "a:\bios.bin" and then press the "Enter" key. During the flashing
process DO NOT TURN OFF THE COMPUTERS POWER AT ALL. DOING SO
WILL RESULT IN A CARD THAT IS UNUSABLE.
-Once the "Update Success" message appears, press the "Enter" key, eject
the System Boot Disk, and then press Ctrl-Atl-Del to restart the computer.
NT 4.0 (All Versions) Driver and BIOS Upgrade Instructions
STEP ONE
-From the Windows NT 4.0 desktop, double click on "My Computer", double
click on "Control Panel", and then double click on "SCSI Adapters".
-Click on the "Drivers" tab, then select "Promise Technology Inc, FastTrak
(tm) IDE Controller" or "Promise Technology Inc, FastTrak66 (tm) IDE
Controller", and then click on "Remove".
Komentarze do niniejszej Instrukcji