Promise Technology SuperTrak SX6000 Instrukcja Użytkownika Pobierz pdf (Strona 28)

Offline Array Recovery Procedures—SuperTrak SX6000 and UltraTrak, Version 5a

28 of 34

Warning

If you leave Initialize Array ON, all of your data will be lost when the new

array is created.

7. Press the arrow keys to move to the Drive Assignments section. Drives are identified

by their Channel ID number. Select the same drives that were used in the array you

are replacing.

8. To select a drive, highlight it with the arrow keys, then press the Spacebar. The

Assignment option appears. Change the option to Y. Repeat this action to select all of

the drives for the array.

9. Press Ctrl-Y to save your inputs when you are done. The Define Array Menu appears

with the new array listed.

[ Define Array Menu ]

[ Keys Available ]

Array No RAID Level Total Drv Capacity (MB) Status

Array 1 RAID5 3 61234 Functional

Array 2 RAID0 2 29827 Functional

Array 3 ----- ----- ----- -----

Array 4 ----- ---- ----- -----

Array 5 ----- ---- ----- -----

Array 6 ----- ---- ----- -----

Note: * --Bootable Array

[ ] Up [ ] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive

10. Press Esc to return to the Main Menu. Press Esc again to exit the Utility and return to

your system boot sequence.

When your system completes booting, the new array will appear in your user

interface. All of your data that can be recovered will be present and accessible.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Brak uwag

Promise Technology SuperTrak SX6000 Instrukcja Użytkownika Strona 28