Promise Technology VTrak J610S Instrukcja Użytkownika Pobierz pdf (Strona 3)

WebPAM PROe

High performance, embedded management-

software for the VTrak RAID Strorage Sy-

stems

The VTrak RAID storage system features an

embedded management software, WebPAM

PROe, that eliminates the need to install additi-

onal software on the network. All VTrak systems

in your network can be configured and monito-

red through single, easy-to-manage webbased

graphic user interface. The software works

through the VTrak system’s Ethernet port — lo-

cally, across a LAN, or across an internet con-

nection — to configure and monitor one or multi-

ple VTrak system(s) and provide error reporting

through pop-up messages, event logging, or

email notification. In the event of a controller

failure, Promise’s management software will

also seamlessly failover and failback. The VTrak

family also simplifies integration with third-party

management applications using industry-stan-

dard SNMP and CIM protocols.

The most important management functions:

1. Configurations Active/Active - Passive/Pas-

sive set failover/failback for „No Single Point of

Failure“ applications.

2. Interface setup, for example: IP Address, Ser-

ver-Name, Read-/Write Modus, Cable sizes.

3. HDD-Arrays, RAID-Level, LUN Management

4. RAID Level Migration. Example: a HDD ar-

ray is migrated from RAID level 1 towards RAID

level 5

5. Online Capacity Expansion (OCE): an exi-

sting HDD array can be expanded with extra

HDD while the system is in process.

6. HotSpare Functionality: The VTrak E-Class

supports both „Multiple Globale HotSpare“, as

well as „Dedicated HotSpare“.

7. Event Notification: Email, NET SEND; audible

(buzzer), and visible (LEDs) alarms

8. Systemstatus and System-/Error-Log: with the

use of WebPAM PROe the system status of all

sectors and components can be monitored at all

times. System- and failure reports will be stored

and are available in the system‘s history.

NOTE:

The VTrak RAID storage systems can also be

managed over a Command Line Interface (CLI)

with the use of a serial or GbE- (1Gb/s Ethernet)

connection.

SAS Controller:

FibreChannel Controller:

HotSwap Power

supplies!

Two powerful, redundant

power supplies are

available for the whole

system and easy to

swap in case of service.

Redundant, HotSwap Fans!

The fan unit is designed to be redundant

and easy to swap in case of service.

FibreChannel RAID-Controller:

• 2 x FibreChannel 4Gb/s (also compatible to 2 Gb/s)

• 1 x SAS x4 Expansions-Port

• 1 x 1 Gb/s Ethernet (GbE) Management-Port

• with 2 Controllern: HotSwap, active/active failover/failback

SAS RAID-Controller:

• 2 x SAS x4 Interfaces (Host)

• 2 x SAS x4 Interfaces (option for E-Class Cascade)

• 1 x SAS x4 Expansions-Port

• 1 x 1 Gb/s Ethernet (GbE) Management-Port

• with 2 Controllers: HotSwap, active/active failover/failback

oder:

VTrak E310 - Back view:

Fibre Channel data port 1 Fibre Channel data port 2

Management port

SAS expansion port

(to JBOD)

Management port

SAS expansion port

(to JBOD)

SAS data/cascade port

SAS data port

SAS data port (optional)

SAS data/cascade port (optional)

Full redundant VTrak Storage System

with SAN FibreChannel in „No Single Point of Failure“:

FC 4Gb/s Switch 1

FC 4 Gb/s Switch 2

Server 1

with 2 x FC HBA (4Gb/s)

Server 2

with 2 x FC HBA (4Gb/s)

• E610f - dual (2) controller

• 3U, 16 HDDs SAS or