Promise Technology VTRAK M610p Instrukcja Obsługi Pobierz pdf (Strona 124)

VTrak M610p Product Manual

112

3. Click the Spare Drive icon.

In Management View, the Enclosure Front View diagram appears with the

location of the spare drive highlighted.

Creating a Spare Drive

To create a spare drive:

1. Click the Subsystem icon in Tree View.

2. Click the Spare Drives icon.

3. Click the Create tab in Management View.

4. Select a spare type, Global or Dedicated.

Global can be used by any disk array. Dedicated can only be used by the

assigned disk arrays

5. To make a revertible spare drive, check the Revertible box.

A revertible spare drive can be returned to spare drive status after it replaces

a failed drive in a disk array. See “Transition” on page 210 for more

information.

6. In the Physical drives field, highlight the physical drive you want to assign as

a spare drive in the Available list and press the >> button to move the drive

to the Selected list.

You can also double-click drives to move them.

7. If you selected a Dedicated spare drive, in the Dedicated to Disk Arrays field,

highlight disk arrays to which you want assign the spare drive from the

Available list and press the >> button to move the array to the Selected list.

You can also double-click arrays to move them.

8. Click the Update button.

Your choices are displayed under New Hot Spare Drives.

9. If you agree with the proposed choices, click the Submit button.

Important

• There must be an unconfigured physical drive available for

selection as a spare drive. See “Viewing a List of Physical

Drives” on page 87.

• Be sure the unconfigured physical drive has adequate

capacity to replace the largest drive in the disk array.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 283 284

Brak uwag

Promise Technology VTRAK M610p Instrukcja Obsługi Strona 124