Promise Technology VTRAK M610p Instrukcja Obsługi Pobierz pdf (Strona 183)

Chapter 5: Management with the CLU

171

Shutting Down the Subsystem

There are two methods for shutting down the subsystem. Choose one of the

following procedures:

• Shutting down the VTrak – Telnet Connection (page 171)

• Shutting down the VTrak – Serial Connection (page 171)

Shutting down the VTrak – Telnet Connection

This function enables you to shutdown the VTrak subsystem on a Telnet

connection. You can only do part of this procedure in the CLU. Additional action

is required, as described below. To shutdown the VTrak:

1. From the Main Menu, highlight Additional Info and Management and press

Enter.

2. Highlight Shutdown or Restart and press Enter.

3. Highlight Shutdown or Restart and press Enter.

4. Highlight Option and press the spacebar to display Restart.

5. Highlight Submit and press Enter.

A warning message appears.

6. Press Y to continue.

The screen will go blank.

7. Wait for no less than two minutes.

8. Manually turn off the power supply switches on the back of the subsystem.

Shutting down the VTrak – Serial Connection

This function enables you to shutdown the VTrak subsystem on a serial